Home Improvement, Remodeling and Repair @ Builders Websource. Home design software, advice, tools, videos, tech notes, links and more!

Search: 

Home Page | Books | BuildersTALK | Building a Dream | Green Building | Links | Software | Tech Notes | Tools | Contact

Messages and Online Forum Q&A

If you find the answer to this question useful, kindly CLICK TO PAY here.



Knowledge


BuildersTALK
Building|Dream
Green Building
How-To Books
Links (Web)
Newsletter
Tech Notes
Videos

Software


BeamChek
Bidding
CAD | AutoCAD
Estimating
EZHomeBuild
Home Design
Landscaping
Lighting Design
PrioSoft
Resi-Cost
Structural

Specialty Tools


CrackMON
Tools
WatrLevel

Support & Info


About Us
Advertise
Contact Us
FAQ
Publish
Services
Support

 

Steel I-beam vs Rectangular Tube for load bearing span

From: bhoy@vertuit.com
Category: Structural
Remote Name: 209.71.57.80
Date: 19 Dec 2001
Time: 07:30 AM

Comments

I am removing a load bearing wall in my kitchen. The span is approx 24 ft. I am removing the 20 studs (some double for doorway headers) that are presently used to support the second floor. The ceiling is 3/4 plaster and ceiling joices are 2x8. The room is split right now 12/24 and will become 24x24. There is plywood/pading/carpet on the sencond floor but no other walls to support. All roof load is transferred to outer walls. The house is built like a Cap Cod so it is not a true second story. The ends of the beam will be supported by steel columns that go through the floor and rest on a 8" I-beam in the basement (through bolt-secured to beam and to basement I-beam). I used the LL as 40 plus 15 for the DL (taken from other posts). The ceiling rafters will rest on the beam and I would rather that the beam not protrude to much. When I run the demo it only lets me use 16 ft at max length. What are my options for the 2 types of I-beams and the square tube beams for this application? How about if I bump the DL to 25 (for light storage or addition of a partition wall on the second floor).

 

Article Tools

BuildersTALK


Ask an Expert
Recent Questions
Click to Pay

Archives


2006-2007
Oct-Dec 2002
Jul-Sep 2002
Jan-Jun 2002
Jul-Dec 2001
Jan-Jun 2001
1999-2000

 

 


ASTM International